Synthetic rubber-base for use on bare concrete or plaster, or over old rubber-base finishes. OPTILON is a quality synthetic rubber-base formula meeting all of the high performance expectations of chlorinated rubber. OPTILON can be applied to bare concrete or plaster as well as over old rubber-base coatings. OPTILON also has excellent chemical resistance and color retention while yielding 2-3 years average service. Two coats of OPTILON are required for best results. On bare surfaces that are unusually porous, a third coat may be necessary.
Coverage: 250 - 275 square feet average per gallon.
 

Optilon paints are sold by the gallon

Acrylic enamel for use on bare concrete or plaster and on old rubber-base finishes. HYDROLON is a water-base acrylic enamel designed for fast easy application on bare concrete or plaster and over an old rubber-base finish. HYDROLON can be applied to damp surfaces and has no solvent vapors. The unique properties of HYDROLON make it perfect for seasonal commercial application or for use in indoor facilities. Two coats are required but a third may be necessary for unusually porous bare surfaces.
Coverage: 250 - 300 square feet average per gallon.
 

Hydrolon paints are sold by the gallon

4/case

POXOPRIME II for application over smooth uncoated concrete or plaster. Used as an undercoat for POXOLON or ZERON, POXOPRIME II soaks in and seals the surface. Coverage: 200 - 250 square feet per gallon.
GUNZITE is a two-part epoxy primer for application over fiberglass or unusually rough plaster or concrete. GUNZITE acts as a fill coat on concrete and plaster and provides a much smoother surface.

Only use as an undercoat for POXOLON or ZERON.
Coverage: 100 - 150 square feet per gallon.
 

Poxoprime II quart, for smooth concrete and plaster
( 200-225 sq ft per gallon ) Special Order

6/case

Poxoprime II gallon, for smooth concrete and plaster
( 200-225 sq ft per gallon )

4/case

Gunzite Primer gallon, for rough concrete and plaster
( 100-150 sq ft per gallon )

4/case