< Prev
K-20
Next
> |
Zeron Epoxy Pool Paint |
2 Parts
Uses Included Catalyst |
Use with primer on concrete, plaster, fiberglass and metal pools - 1
coat. The
ZERON system is the longest lasting epoxy pool coating available. You
can expect
up to eight years of service from one application of this product. The
greatest
advantage of the ZERON system is that it only requires one coat. ZERON
is a
heavier bodied material than POXOLON so it will require a little more
effort in its
application and will not spread as far. However, due to the extremely
long life of
ZERON, the cost per year of service is lower than any other pool coating
available.
This coating may be applied by roller or airless spray equipment. ZERON
is
highly recommended for professional pool builders and pool service
companies
as an alternative to traditional pool plaster. The finished surface will
stay brighter
and will be easier to keep clean than a plastered pool.
Coverage: Approximately 125 - 150 square feet per gallon.
|
Available in these attractive colors:
White, Blue Ice, Bikini Blue and Blue Mist
( we stock the colors listed
below, colors which are not listed are special order )
|
H2O # |
Manf. # |
Description |
Qty |
7023109 |
#390-QT |
390 Zeron, White, quart *** |
6/case |
7023102 |
#390-GAL |
390 Zeron, White, gallon |
4/case |
7023123 |
#391-QT |
391 Zeron, Blue Ice, quart *** |
6/case |
7023116 |
#391-GAL |
391 Zeron, Blue Ice, gallon |
4/case |
7023130 |
#392-GAL |
392 Zeron, Bikini Blue, gallon |
4/case |
***
Special Order |
View Technical Bulletin No.100 for more information on:
ZERON Epoxy Coating as an Alternative to a Plaster Finish
View Technical Bulletin No.104 for more information on:
Fundamentals for the Application of Epoxy Coatings
View Technical Bulletin No.105 for more information on:
ZERON and POXOLON on Unpainted Concrete, Sandblasted Concrete, and
Plaster Pool Surfaces
View Technical Bulletin No.119 for more information on:
The Application of (ZERON-POXOLON) or (PARALON 2 - EXCELLON, OPTILON)
on Previously Painted Pools
|
Paralon 2 Rubber Base Pool Paint |
1 Part
No Catalyst Required |
Chlorinated rubber pool enamel for use on bare concrete or plaster, or
over existing chlorinated rubber-base finishes. PARALON 2 is our premium
grade chlorinated rubber pool enamel. This coating is recommended for
refinishing existing chlorinated rubber coatings. It is an attractive,
low sheen, rubber-base pool enamel with high water resistance. The soft
satin appearance will please the most discriminating pool owner while
providing economical protection for the pool surface. Two coats of
PARALON 2 are required for best results. On unusually porous, bare
surfaces like concrete or plaster, a third coat may be necessary.
Coverage: 250 - 275 square feet average per gallon.
|
Available
in these attractive colors:
White, Blue Ice, Blue Mist, Bikini Blue and Black
( we stock the colors listed
below, colors which are not listed are special order )
|
H2O # |
Manf. # |
Description |
Qty |
7023207 |
#290-QT |
290
Paralon II, White, quart |
12/case |
7023203 |
#290-GAL |
290
Paralon II, White, gallon |
4/case |
7023215 |
#291-QT |
291
Paralon II, Blue Ice, quart *** |
12/case |
7023211 |
#291-GAL |
291
Paralon II, Blue Ice, gallon |
4/case |
7023223 |
#292-QT |
292
Paralon II, Bikini Blue, quart *** |
12/case |
7023219 |
#292-GAL |
292
Paralon II, Bikini Blue, gallon |
4/case |
7023235 |
#297-QT |
297
Paralon II, Black, quart |
12/case |
7023231 |
#297-GAL |
297
Paralon II, Black, gallon *** |
4/case |
***
Special Order |
View Technical Bulletin No.111 for more information on:
Refinishing Fiberglass Pools and Spas with
GUNZITE Primer and ZERON (1 coat) or POXOLON (2 coats) Finishing Coat
View Technical Bulletin No.123 for more information on:
PARALON 2 and EXCELLON Chlorinated Rubber Pool Paints
|
< Prev
K-20
Next
> |
Sorry, we are not a retailer.
We sell wholesale to businesses associated with the Pool / Spa and Water
Industries only.
Copyright
2018 H2O Company Inc.
|
|