|
< Prev
L-3
Next
> |
|
Cantilever Jump Stand
- S.R.Smith |
|
|
|
This jump stand is unsurpassed in design
and performance, making it
the top of the line. The dual action obtained from the steel leaf
springs
gives short boards the smoothest, maximum lift. Each stand and spring
assembly is completely finished with baked-on white enamel paint.
Order
spring separately for the length board desired.
Use either Frontier III or Glas-Hide board.
|
|
Jump Stand with Jig Only |
|
H2O # |
Manf. # |
Description |
|
6245401 |
69-209-001 |
606/608 cantilever jump stand with jig,
stand only,
requires 6 foot or 8 foot spring sold
separately, select from below
|
Assembly and Installation Instructions
|
Spring Assembly for Jump Stand |
|
H2O # |
Manf. # |
Description |
|
6245406 |
69-209-026 |
606 cantilever 6 foot spring assembly, for 6 foot board |
|
6245411 |
69-209-028 |
608 cantilever 8 foot spring assembly, for 8 foot board |
|
|
Flyte Deck II Stand
- S.R.Smith |
|
board sold separately
|
|
The innovative Flyte-Deck II diving
stand design is sleek, smooth and appealing.
The outside surface is made of tough acrylic that resists scratching, rusting or fading.
The snow white finish will enhance the
beauty of any pool.
Board sold separately; use Fibre-Dive, Frontier III or Glas-Hide board.
|
|
Flyte Stand and
Jig Only |
|
H2O # |
Manf. # |
Description |
|
6245602 |
70-209-736-2 |
Flyte Deck II Stand for 6 foot board, with jig |
|
6245607 |
70-209-738-2 |
Flyte Deck II Stand for 8 foot board, with jig |
|
6245609 |
70-209-740-2 |
Flyte Deck II Stand for 10 foot board, with jig
- Special Order |
Assembly and Installation Instructions
|
|
|
Jigs Only - No Stand |
|
H2O # |
Manf. # |
Description |
|
6245603 |
71-209-700-SS |
Jig, 6 foot for Flyte Deck II |
|
6245608 |
71-209-704-SS |
Jig, 8 foot for Flyte Deck II,
new style* |
|
- |
71-209-703-SS |
Jig, 10 foot for Flyte Deck II
- Special Order |
*Note,
the above 8 foot board jig measures 24 inches long and is a newer style
jig.
There is a previous 8 Foot board jig, which is now obsolete and
measured 22 inches long,
S.R.Smith number 71-209-702. If you need obsolete jig, call for availability. |
|
|
Steel Meter Stand
- S.R.Smith |
|
board sold separately
|
|
The finest diving stands made completely
pre-finished with baked-on white
enamel paint. Three deluxe models: 1/2 meter, 3/4 meter and 1 meter.
All
have beautiful sleek lines with durable, double coated finish.
Jig mounted
and predrilled for hand rails.
Available for 8 ft., 10 ft., and 12 ft.
board.
Board sold separately.
use Fibre-Dive, Frontier III or Glas-Hide board.
|
|
Meter Stand and
Jig Only |
|
H2O # |
Manf. # |
Description |
|
6245612 |
70-209-501 |
1/2 Meter Stand for 8 foot board, with jig |
|
6245617 |
70-209-502 |
1/2 Meter Stand for 10 foot board, with jig |
|
6245622 |
70-209-510 |
3/4 Meter Stand for 10 foot board, with jig |
|
6245624 |
70-209-520 |
1 Meter Stand for 10 foot board, with jig
- Special Order |
Assembly and Installation Instructions
|
Jig Only - No Stand |
|
H2O # |
Manf. # |
Description |
|
6245626 |
71-209-541-SS |
Jig
for 1/2, 3/4 and 1 Meter Boards |
|
|
"U" Style Frame
- S.R.Smith |
|
board sold separately
|
|
U-Style Diving Frames are intended for moderate to heavy
use on
residential pools.
18 inch U-Style Diving Frames are suitable for use
with
diving boards in lengths
ranging from 6 feet to 10 feet.
Board sold
separately.
use Fibre-Dive, Frontier III or Glas-Hide board.
|
|
"U" style Dive Frame |
|
H2O # |
Manf. # |
Description |
|
6245632 |
UF-18-101 |
18 inch "U" style dive frame, set of two
with fulcrum cover |
Assembly and Installation Instructions
|
Replacement Hardware |
|
H2O # |
Manf. # |
Description |
|
6245627 |
FC-100A |
Board fulcrum cover |
|
6245637 |
67-209-911-SS |
Board mounting bolt and hardware kit |
|
|
< Prev
L-3
Next
> |
Sorry, we are not a retailer.
We sell wholesale to businesses associated with the Pool / Spa and Water
Industries only.
Copyright
2018 H2O Company Inc.
|
|
