Normal Application:
1. The most effective and economical use of our stabilized chlorine chemicals will be obtained if the pool water is first stabilized by adding an initial 30 ppm of STABILIZER to the pool.
2. To obtain a 30 ppm level, add 1 pound of STABILIZER to the pool for each 4,000 gallons of pool water.
3. Add STABILIZER slowly to surface skimmer. Make sure filter is clean with full pressure drop. Recirculate water for at least 6 hours.
4. Maintain a cyanuric acid level of 30-50 ppm using a suitable test kit. Check the concentration of cyanuric acid periodically at least once a year.

Tips:
A properly stabilized pool will significantly reduce rapid dissipation and loss of chlorine caused by chemical reaction in intense sunlight. CHLORINE STABILIZER acts as a "shield" against such loss.

Normal Application:
Use one pound of this product per 3,000 gallons of pool water to provide an initial stabilizer level of 40 ppm. The use of one pound per 4,000 gallons of pool water will provide an initial stabilizer level of of 30 ppm. Broadcast directly into the pool, scattering over the surface of the water. For pools with plastic piping, this product may be slowly added through the skimmer. Keep the water circulating continuously. When the chemical reaches the filter, there may be a temporary increase in filter pressure which will dissipate as the chemical is dissolved. Do not backwash filter for 24 hours after application of stabilizer.  

Maintain a cyanuric acid level of 30-50 ppm using a suitable test kit.

Tips:
A properly stabilized pool will significantly reduce rapid dissipation and loss of chlorine caused by chemical reaction in intense sunlight. CHLORINE STABILIZER acts as a "shield" against such loss.

1. Shake Well!
2. With circulation pump running pour Instant pool water Conditioner into pool skimmer slowly OR pour directly into pool water, while walking around perimeter of pool/Brush to speed absorption.
3. Rinse container with pool water and shake.
4. Pour remaining rinse solution into skimmer or pool.
5. 1 gallon will increase CYA reading 35ppm in 10,000 gallons of water.