|
H2O#
7408230
Vender #Q12DS501.54SNO1K
Harwil Q-12 Flow
Sensor
1/2" Threaded - 1-7/8"
immersion length
2 Amp, Connection type = terminal connectors.
Switches on at 10 gpm and switches off at 8 gpm
0 GPM to turn on when used with 1-1/2" pipe.
Requires 23 GPM to turn on when used with 2" pipe.
Not for use in 3/4" pipe, ( Sundance )
  
Includes: 1/2" fpt x 1/2" fpt Coupling, P.V.C
Includes: 1/2" mpt compression strain relief
for apox 3/8" wide electrical cords.
|
H2O#
7408235
Vender #Q12DS50
Harwil Q-12 Flow
Sensor
1/2" Threaded
1-3/8"
immersion length from bottom of threads
2-3/16" to top of threads
1/2 Amp, Connection type = terminal connectors.
Flow 10 GPM
|
H2O# 3818210
Goldline #GLX-FLO-RP-25
Harwil Replacement Flow Sensor
1/2" Threaded
Originally installed in Goldline's #GLX-FLO
300V, 20 Amp max, 25 ft cord
Requires 10 GPM to turn on when used with 1-1/2" pipe
Requires 12 GPM to turn on when used with 2" pipe
|
|
H2O# 3818212
Goldline Aqua Rite #GLX-FLO
Harwil Flow Sensor mounted in 2" tee
2" Slip X 2" Slip X 2" FIP, PVC
300V, 20 Amp max, 15 ft cord
Requires 10 GPM to turn on when used with 1-1/2" pipe
Requires 12 GPM to turn on when used with 2" pipe
 |
H2O#
7408220
M-25 Grid Flow Switch
Manf #57-F3-2500-WHT
1-1/2" Slip X 1-1/2"
Slip, PVC
25 Amps, (2) 1/2" electrical inlets
Requires 12 GPM to turn on, turns off at 7 GPM
Be careful not to confuse this
M-25 flow switch with the same looking M-1 flow switch that was used in
Evolution and Crystal Pure low flow systems. The M-1 requires less flow, can
only handle 1 amp and is not interchangeable with this switch, or visa
versa.
|
|
